SDS

Product Name: Corrosion Stop Print Date: 4/12/17
Product Code: 16-CSP Total pages: Page 4 of 7
4
Empty containers may contain residues from the product. Treat empty containers with the same precautions
as the material last contained. Do not cut, weld or apply heat to empty containers Do not incinerate
Storage:
Store in a cool, dry area, away form heat or direct sunlight. Keep containers closed when not in use. Do not
store with incompatible materials
8. Exposure Controls / Personal Protection
Protective Equipment:
Use synthetic gloves if necessary to prevent excessive skin contact. Do not wear contacts and
always use ANSI approved safety glasses or splash shield.
Engineering Controls:
General or dilution ventilation is frequently sufficient as the sole means of controlling employee
exposure. Local ventilation is usually preferred. Use a NIOSH approved respirator if ventilation is
not adequate to maintain exposures below TLV levels.
Respiratory Protection:
Use adequate ventilation to maintain exposure limits. If the exposure limits of the products or
any of its components is exceeded, an approved organic vapor mask should be used (consult your
safety equipment supplier). Above exposure levels an approved self-contained breathing
apparatus or airline respirator with full face-piece is required
Other Suggested Equipment:
Eye wash station and emergency showers should be available. Spill containment equipment should
be available.
Discretion Advised:
We. take no responsibility for determining what measures are required for personal protection in
any specific application. The general information should be used with discretion.
Exposure guidelines:
Ingredients CAS # Percent Exposure Limits
Petrolatum 8009-03-8 25-35 % ACGIH (TWA) 5mg/m3 (1)
Heptane
426260-76-6 25-35% OSHA (TWA 500 ppm
ACGIH (TWA) 400 ppm
Acetone 67-64-1 25-35%
OSHA (PEL) 1000 ppm
ACGIH (TLV) 500 ppm
Liquefied Petroleum Gas 68476-86-8 15-20 % OSHA (PEL) 1000 ppm
ACGIH TLV 1000 ppm