Instructions / Assembly

Take Down Instructions
It is EXTREMELY IMPORTANT TO STORE THE INSERT NAME HERE™ DRY! Ensure that all the players have left play
area. Remove any loose articles or debris from play area. Empty any water from water units while still inflated. Allow the unit to
continue to run until thoroughly dry. Turn off, and unplug blower. Once product is fully deflated, fold & store in cool, dry area.
NEVER STORE YOUR INFLATABLE WITHOUT THOROUGHLY DRYING.
 To thoroughly dry your inflatable, turn off all sprayers, and deflate the unit. Dump All standing water from the unit and shake
dry.
 Once the unit is dry, re-attach the blowers, and re-inflate the unit. Your unit will begin to dry from the inside-out. This is critical
to avoiding issues such as mold and mildew, and to prolonging the life of your Blast Zone® inflatable.
Important Care Instructions
In order to maximize usage, care instructions must be followed.
Environmental factors such as prolonged exposure to sun, water, heat or cold will destroy inflatables, so the inflatable must
not be left outside when not in use.
Inflatables MUST be stored dry, or mold will develop and cause irreparable decay to the material. Please note this will void
your warranty. Units left outside in humid environments will develop mold as well. Refrain from storing your item in air
tight containers, as mold/mildew may develop.
Maximum weight limits must be obeyed at all times, or the unit may fail.
Do not use harsh chemicals to clean your inflatable. Soap and water may be used sparingly.
Seams and splits can be repaired utilizing a needle and strong thread (not included). The patch kit included is suitable for
minor repairs.
To repair, deflate the product thoroughly, and ensure the surface is dry. Cut patches to sizes suitable for repair. Apply glue
on both the repair patches, and the damaged surface. For larger punctures and rips, the unit can be repaired using the
included patch and strong thread.
Your Blast Zone® bouncer is designed with inner stitching and constant air flow, so the unit is still functional with small
holes. If outside stitching separates, stitches can be repaired using common thread. Thanks to inner stitching, the inflatable
will still work.