User Manual

ManualsBrandsBlast Media Group ManualsElectronicsBlast

Blast Box Manual 1

Blast Box Manual

Charging Device

Blast Box can be charged through any microUSB cable connected to a powered

source.

Audio Input

Blast Box capture audio from any audio source through the RCA input in the back

of the device.

Headphone Monitoring and Volume Knob

There is a headphone jack on the front of the device that can be used to monitor

playback and ensure that audio is being capture through the device properly. The

volume knob can be used to raise and lower the headphone monitoring volume

but does not effect the capture and broadcast volume.

Buttons

Power Button (magenta) - Turns on and off device, activates pairing mode, starts

and stops a recording or broadcast.

Mode Button (cream) - Toggles between Live Mode and Offline Mode.

Summary of content (5 pages)

PAGE 1
Blast Box Manual Charging Device Blast Box can be charged through any microUSB cable connected to a powered source. Audio Input Blast Box capture audio from any audio source through the RCA input in the back of the device. Headphone Monitoring and Volume Knob There is a headphone jack on the front of the device that can be used to monitor playback and ensure that audio is being capture through the device properly.
PAGE 2
Turning On and Off Device When device is turned on, press and hold the Power button to turn on the device. When device is turned off, press and hold the Power button to turn off the device. Pairing Device Over Bluetooth  Press and hold the Power button.  Continue holding Power button past device powering on for 3 seconds until pairing mode is displayed on screen.  On your iOS or Android device, select "Blast Box" from the Bluetooth menu.
PAGE 3
 Once the connection is established, the WiFi and Password will be saved securely with your Blast Radio account in order to work with any Blast Box. Broadcasting Live  With your device on, paired, and connected to WiFi, press the Power button to start broadcasting when in Live mode The word LIVE appears in the top left corner by default, denoting Live Mode). If not in Live Mode, press the Mode button to toggle Live Mode on.
PAGE 4
With the device off, press and hold the Power and Mode buttons together for 20 seconds.
PAGE 5
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.