Manual

53
english
fig.22
15. Trigger assembly
15.1 Trigger assembly
The Blaser Blaser Tactical 2 bolt action
rifle is equipped with an adjustable
trigger. The trigger pull weight is
adjusted at the factory to approx.
1200 g (9.8 N).
Adjustment potential:
- Trigger position
- Trigger pull
- Trigger stop
WARNING:
 Before making any adjustments
make sure there are no cartridges in
the chamber or magazine.
15.2 Trigger position
The trigger blade (fig. 22-1) can be
moved along the longitudinal axis to
adapt to the hand of the shooter.
• loosen lock screw (fig. 22-2).
• shift trigger blade to the desired
position.
• tighten lock screw (fig. 22-2).
15.3 Trigger pull
The trigger pull weight can be adjusted
with the trigger pull screw (fig. 22-3):
• increase trigger pull weight
turn the trigger pull screw (fig. 22-3)
clockwise
• decrease trigger pull weight
turn the trigger pull screw (fig. 22-3)
counterclockwise.
15.4 Triggerstop
The trigger stop can be adjusted with the
trigger stop screw (fig. 22-4):
• turn triggerstop screw (fig. 22-4)
clockwise until trigger is past the
release point.
• put the safety in the “off safe“
position.
• pull the trigger and turn triggerstop
screw (fig. 22-4) counterclockwise until
the sear releases the firing pin.
• by counting to turn the triggerstop
screw (fig. 22-4) counterclockwise the
desired travel beyond the release point
can be adjusted.
1
2
4
3
11230_BLA_GAN_Tactical2_D_En_FR_Q6.qxd 20.11.2007 14:46 Uhr Seite 53