Manual

38
english
4. Assembling, taking down
WARNING:
 Make sure there are no cartridges in
the chamber or magazine.
4.1 Assembling
• Remove the large allen key (SW 4)
from its pocket in the shipping carton.
With the barrel screw studs pointing
down, insert the barrel into the recei-
ver (fig. 1).
fig. 1
fig. 2
fig. 3
• Then, insert the allen key into the holes
on the bottom of the fore-end and
tighten the two allen screws equally
locking the barrel and receiver together
(fig. 2).
NOTE:
Do not use any extension tools on the
allen key to tighten screws. Good hand
tightness is sufficient.
• Insert the magazine from the bottom
into the receiver until both magazine
releases are engaged (fig. 3).
11230_BLA_GAN_Tactical2_D_En_FR_Q6.qxd 20.11.2007 14:46 Uhr Seite 38