Blaser Jagdwaffen GmbH D-88316 Isny Germany
3.2. 2.3. 1.1. 2.1. 3.2. 2.4. 1.1. 1.2. 1.2. 4.1. 2.1. 2.4. 4.1. 3.1. 4.2. 3.1. 4.2. 2.2. 2.2.
1 8.1. 8.2. 17 2 6.1. 9.1. 16 3 15 6.1. 4 14 9.1. 7.1. 13 5 6 12 7 11 10 8 9.1. 9 9.2.
11. Warranty Conditions Description of parts 1. Manufacturer’s warranty 1 Foresight 9 Warranty of Blaser Jagdwaffen GmbH is provided in addition to statutory warranty claims by dealers, provided, that the enclosed firearms certificate is filled in completely and received by Blaser Jagdwaffen GmbH within ten days after the date of sale. Warranty is provided exclusively for the first purchaser having his residence in the country of purchase.
General Safety Rules Your new Blaser S 2 (S 2 Safari) is characterised by special design features, making it very different from other side-by-side rifles. The enhanced safety features of your Blaser rifle should never induce you to ignore the necessary care and legal provisions with respect to handling arms. Please check first, whether you have the correct operating nstructions: the model S 2 and the calibre are indicated on left side of the barrel, on its lower end.
1. Assembly of the Rifle 2. Disassembly of the Rifle 1.1. Securing barrel set 1.2. Installing forearm (only possible when forearm is removed) • Engage forearm on hinge bolt, flush with the receiver, and tilt it onto the barrel, until it reaches the stop. • Seat the front barrel hook onto the hinge bolt. Due to the tight fit, this requires care. • Grip around barrel hook part and action with one hand, press barrel hook into its seat, thus closing the rifle.
3. Opening and Closing the Rifle 4. Safety 3.1. Opening the rifle 3.2. Closing the rifle • Press the locking lever all the way to the right and hold it in this position. • Do not touch locking lever. The safety system of the Blaser S 2 (S 2 Safari) is based on uncocked firing pin springs. The firing pin springs are cocked with the safety slide (cocking slide) immediately before the shot. • The barrel hook is disengaged. • The barrel set can now be tilted downwards (“opened”).
5. Loading the Rifle 6. Firing 7. Unloading 8. Open sights 5.1. Loading 6.1. Firing 7.1. Unloading the rifle • Remove oil from barrels and chamber and check them for foreign matter. • Cock the rifle by pushing the safety slide (cocking slide) forward. • Sight at target and fire: - the front trigger releases the shot in the right barrel - the rear trigger releases the shot in the left barrel. Open the rifle.
. Mounting of Scope The Blaser S 2 (S 2 Safari) is prepared for installation of the Original Blaser saddle mount (DBP). We assume that your scope has been mounted correctly by your specialized dealer on the barrel assigned to it. 10. Care and Maintenance 9.2. Removing scope • Hold the rifle with your left hand at the forearm and support it on your thigh. • Open both lids of the mount levers. 9.1.
