Instruction Manual

41
English
41
13
14
Reticle illumination
Inserting the battery
Your Blaser riescope is equipped with an
innovative illuminated reticle, which is pow-
ered by a lithium battery type CR 2032. This
battery and a spare battery are included with
the scope. The illumination unit of the Blaser
riescop is located on the right side of the
main tube from the shooters point of view.
1. If it is still switched on, switch o the
illuminated reticle by pressing in the
rotary rocker switch.
2. Turn the battery compartment cover
(Fig.13) anticlockwise and remove the
cover. The battery compartment is
located beneath.
3. Insert the battery into the battery com-
partment so that the plus pole is visible
(Fig. 14).
4. Replace the battery compartment
cover and carefully tigthen it by turning
it clockwise (Fig. 13).
NOTE
After changing the battery, the brightness
setting is reset to a medium brightness
value.