Instruction Manual

39
English
39
7 9
8
Quick Distance Control (QDC)
(BLASER 2.8-20x50 iC &
4-20x58 iC)
Operation
The 2.8-20x50 iC and 4-20x58 iC models are
equipped with the QDC quick adjustment
(Quick Distance Control) as a stan dard fea-
ture. The QDC has a locking function in two
positions and a zero stop, which allows clear
orientation within the adjustment range. The
QDC is unlocked by pulling up the turret. The
scale of the QDC becomes visible (Fig. 7).
By turning the QDC knob clockwise, the
shooter can dial in elevation for distances
longer than the zero distance. The Quick
Distance Control can be locked in the zero
position and at “4 clicks high” (most recom-
mended distance) by pressing down the
QDC dial (Fig. 8 and 9).
4-Clicks-high setting (most recom-
mended distace)
When the QDC is zeroed at 100 m, the QDC
dial can be set to the most recommended
distance by dialing 4 clicks high and locked in
this position (Fig. 9).