Instruction Manual

15. R8 trigger unit .338 Lapua Magnum

General

This specifically customized trigger unit ensures a

reliable feeding of the cartridge, including those

with maximum length (max. L6 according to CIP)

and enables travelling hunters and long range

shooters to shoot with this highly popular .338

Lapua Magnum caliber.

Function

The new trigger unit can be used in all R8 Profes-

sional Success stock and receiver units.

ATTENTION

Bolt head, barrel and trigger unit must correspond

to the caliber .338 Lapua Magnum. The marking

can be found on the cylinder head of the bolt head

and on the rear end of the barrel near the serial

number. To avoid any possibility of confusion, the

trigger unit .338 Lapua Magnum has an optimized

bullet buffer which is orange in colour and glued

in position. The trigger unit is also marked appro-

priately. (see picture)

Technical Remarks

Trigger unit .338 LAPUA

Cartridge length: Up to the maximal cartridge

length specified by CIP

Trigger unit ATZL .338 LAPUAA

Cartridge length: Differing from CIP maximum

length: maximum to 92.2mm

Care and Maintenance

The magazine insert and the trigger unit must al-

ways be kept clean and always remain free from

foreign substances.

» Optimized bullet buff er, orange in colour and glued

in position

» Caliber marking (only .338 LAPUA Mag.)

english