Instruction Manual

45
8. Guarantee
1.
Manufacturer’s warranty
Warranty of Blaser Jagdwaffen GmbH is provided in
addition to statutory warranty claims by dealers, pro-
vided, that the enclosed firearms certificate is filled
in completely and received by Blaser Jagdwaffen
GmbH within ten days after the date of sale. War-
ranty is provided exclusively for the first purchaser
having his residence in the country of purchase.
The warranty applies to the metal and plastic parts
of the rifle only, including original Blaser riflescope
mounts, but not the rifle scope. Wooden parts of
the rifle require special care and, being natural pro-
ducts, are subject to natural changes. Warranty for
wooden parts is excluded.
The warranty period amounts to ten years, start-
ing with the date of sale. It includes any defects
of and damages to the rifle (metal and plastic
parts), which are proven to be due to faulty mate-
rial or manufacturing. Within this framework, the
manufacturer shall bear the costs for material and
working time. For performance of work under this
warranty, the rifle has to be returned to the spe-
cialized dealer or the production company in Isny.
Risk and costs of transportation of the rifle (out-
ward and return) shall be borne by the customer.
Warranty is performed in the discretion of manuf-
acturer by repair or replacement of defective parts;
replaced parts pass into manufacturer’s property.
2.
Warranty for gun efficiency
The firing precision of a gun depends on a multi-
tude of factors. The most important factor is the
ammunition. Not every barrel fires equally well
with every type of ammunition, there may be
considerable differences in efficiency. The scope
and its mount are of the same importance. Faulty
mounting are the most common causes for un-
satisfactory gun efficiency. For these reasons, you
should use brand rifle scope, mounted by a spe-
cialist, and you should tune in the ammunition to
your rifle by testing several types of ammunition.
Ammunition of the same make and charge may
exhibit different efficiency and impact point char-
acteristics from one manufacturing run to the other
and from one rifle to the other.When the optimum
of ammunition, rifle scope and mount were se-
lected, we provide a warranty for the excellent
efficiency of our rifles. Complaints regarding gun
efficiency have to be brought forward in writing
within 20 days after the date of sale. We reserve
the right to submit the rifle to an independent in-
stitution for verification (DEVA or Staatliches Be-
schussamt) [government proofhouse]. If excellent
gun efficiency is confirmed there, we are entitled to
claim the costs incurred for the tests from customer.
3.
Scope of warranty
Work performed under warranty does not cause
any prolongation or renewal of the warranty pe-
riod for the rifle or built in spare parts. The warranty
period for installed spare parts ends at the same
time as the warranty period for the entire rifle.
4.
Guarantee exclusion
The guarantee shall be excluded with:
• Damage that is caused as the result of normal
wear and tear, with non-observance of the ope-
rating instructions or improper use or handling
and if the gun shows mechanical damages of
any kind.
• Damages that are the result of force majeure or
environmental influences
• Repairs, treatment or changes to the gun perfor-
med by third parties.
• Use of reloaded or non-CIP-permitted ammu-
nition.
• Blueing carried out by a third party.
The guarantee does not apply for optical sight
equipment and telescopic sight mounts of man-
ufacturers other than Blaser Jagdwaffen GmbH.
More extensive or other claims, especially those
that refer to compensation for damages that go
beyond the gun itself (consequential damages)
shall be excluded (provided liability is not legally
ordered as compulsory).
02-2014 Subject to technical modifications.
english