Instruction Manual

36
5.13.1. Removing the non-adjustable
recoil pad
• Remove the recoil pad fixing screws L und
M with a size 1 phillips screwdriver.
• Remove the recoil pad.
NOTE:
Both recoil pad fixing screws L and M are
fitted inside the recoil pad and are not visib-
le from the outside. A pre-formed slit can
be found on the face side of the recoil pad,
at the height of the recoil pad fixing screws.
To remove the recoil pad fixing screws, push
the size 1 phillips screwdriver into the slit
opening on the recoil pad. To prevent da-
mage to the recoil pad we recommend that
the tip of the screwdriver be coated with
gun oil or gun grease.
5.13.2. Removing the adjustable recoil
pad*
• Loosen screw H with the 1.5 mm Allen
Key (approx. 5 turns).
• Slide the recoil pad complete with recoil
pad fixing plate and adjustment plate all
the way to the top.
• Remove the recoil pad together with recoil
pad fixing plate and adjustment plate.
5.13. Adjusting the stock balancer