Instruction Manual

35
5.12.1. Adjusting the cast
• Loosen the fixing screws F and G with
the 3 mm Allen Key.
• Slide the recoil pad together with recoil
pad fixing plate up to the top and remove.
• Loosen the fixing screws I and K with
the 3 mm Allen Key.
• Move the adjustment plate into desired
position .
• Tighten the fixing screws I and K with
the 3 mm Allen Key.
• Return recoil pad to desired position.
• Tighten the fixing screws F and G with the
3 mm Allen Key.
5.12.2.
Adjusting the drop
• Loosen the fixing screws F and G with
the 3 mm Allen Key.
• Slide the recoil pad complete with recoil
pad fixing plate to desired position and
hold.
• Tighten the fixing screws F and G with
the 3 mm Allen Key.
5.12. Adjustable recoil pad*
*
not available in the US
Recoil pad
fixing screws
Recoil pad fixing
plate
Adjustment plate
Recoil
pad
Distance
spaces
5.12.3. Adjusting the pitch
• Turn adjustment screw E anti-clockwise
with the 3 mm Allen Key = Reduces the
pitch angle.
• Turn adjustment screw E clockwise with
the 3 mm Allen Key = Increases the pitch
angle.
5.12.4. Adjusting the stock length
• Loosen the recoil pad fixing screws O
and P with the 3 mm Allen Key.
• Remove the recoil pad.
Stock length extension
• Attach one or more distance spacers
onto the recoil pad fixing plate.
• Attach the recoil pad.
• Tighten the recoil pad fixing screws o
and P with the 3 mm Allen Key.
• Screws should correspond with amount
of spacers used.
Stock length reduction
• Remove one or more distance spacers
from the recoil pad fixing plate.
• Return the recoil pad.
• Tighten the recoil pad fixing screws O
and P with the 3 mm Allen Key.
• Screws should correspond with amount
of spacers used.
english