Instruction Manual

34
5.11. Adjustable comb
5.11.1. Adjusting the drop at comb
• Loosen the fixing screws A and B with the
3 mm Allen Key.
• Lift off the comb and adjust the memory
screw M with the 3 mm Allen Key to the
desired height.
• Return the comb and tighten the fixing
screws A and B with the 3 mm Allen Key.
NOTE:
Both fixing screws O and P are fitted inside
the recoil pad and are not visible from the
outside.
A pre-formed slit can be found on the face
side of the recoil pad, at the height of the
fixing screws. To remove the fixing screws,
push the 3 mm Allen Key into the slit ope-
ning on the recoil pad. To prevent damage
to the recoil pad, we recommend that the
tip of the Allen Key be coated with gun oil
or gun grease.
The delivery of the adjustable recoil pad*
should consist of: Recoil pad fixing screws
in three different lengths.
When inserting or removing distance
spacers, longer or shorter screws should be
used accordingly.
5.11.2. Adjusting the cast
• Loosen the fixing screws A and B with the
3 mm Allen Key.
• Lift off the comb.
• Loosen the fixing bolts C and D with the
3 mm Allen Key.
• Move the fixing bolts to the left or to the
right (for more cast off move to the right).
• Tighten the fixing bolts C and D with the
3 mm Allen Key.
• Return the comb.
• Tighten the fixing screws A and B with the
3 mm Allen Key.