Manual

11
• Tighten the fixing bolts C and D with
the 4 mm Allen key
• Return the comb and hold at required
height
• Tighten the fixing screws A and B with
the 4 mm Allen key
Adjustable recoil pad
Adjusting the cast
• Loosen the fixing screws F and G with
the 3 mm Allen key
• Slide the recoil pad together with recoil
pad fixing plate up to the top and remove
• Loosen the fixing screws I and K with
the 3 mm Allen key
• Move the adjustment plate into desired
position
5.12.1.
5.12.
• Tighten the fixing screws I and K with
the 3 mm Allen key
• Return recoil pad to desired position
• Tighten the fixing screws F and G with
the 3 mm Allen key
Adjusting the drop
• Loosen the fixing screws F and G with
the 3 mm Allen key
• Slide the recoil pad complete with recoil
pad fixing plate to desired position and
hold
• Tighten the fixing screws F und G with
the 3 mm Allen key
Adjusting the pitch
• Turn adjustment screw E anti-clockwise
with the 3 mm Allen key = Reduces the
pitch angle
• Turn adjustment screw E clockwise with
the 3 mm Allen key = Increases the pitch
angle
Adjusting the stock length
• Loosen the recoil pad fixing screws O
and P with the 3 mm Allen key
• Remove the recoil pad
Stock length extension
• Attach one or more distance spacers on-
to the recoil pad fixing plate
Stock length reduction
• Remove one or more distance spacers
from the recoil pad fixing plate
• Return the recoil pad
• Tighten the recoil pad fixing screws O
and P with the 3 mm Allen key
5.12.4.
5.12.3.
5.12.2.
5. Operation
recoil pad
fixing screws
Recoil pad
fixing plate
Adjustment plate
recoil
pad
Distance
spacers
10
5. Operation
Steel shot cartridges
DANGER:
The barrels will be damaged if the wrong
or no changeable chokes are fitted!
• If steel shot, tungsten, tungsten iron or
molyshot are used, do not use changeable
chokes of sizes 3/4 (im), 1/1 (f) or 5/4 (ef)
and above.
• Only fire with fitted changeable chokes.
The F3 Shotgun fires steel shot cartridges
and is steel shot compatible.
5.10.
Adjustable comb
Adjusting the drop at comb
• Loosen the fixing screws A and B with
the 4 mm Allen key
• Lift or drop the comb to the desired height
• Tighten the fixing screws A and B with
the 4 mm Allen key
Adjusting the cast (at face)
• Loosen the fixing screws A and B with
the 4 mm Allen key
• Lift off the comb
• Loosen the fixing bolts C and D with
the 4 mm Allen key
• Move the fixing bolts to the left or to the
right (for more cast off move to the right)
5.11.2.
5.11.1.
5.11.