Instruction Manual

5.8. Trigger adjustment F16
Sporting
DANGER:
The trigger adjustment can only be done with an
unloaded and open firearm.
Depending on the size of the hands, or the
shooter’s preferences, the F16 Sporting’s trigger
can be adjusted to the rear or to the front.
f Loosen the trigger holding screw A using
a 1.5mm Allen key.
f Slide the trigger to the desired position (ar-
row).
f Tighten up the trigger holding screw A using
a1.5 mm Allen key.
31
English
30
Assembly of the balancer weights Possible combinations
f 2 small weights at the rear
(total weight: 85.0 g / 3 oz.)
f 4 small weights
(total weight: 170.0 g / 6 oz.)
5.7. F16 barrel balancer
Scope of delivery
a
4 small weights (each 42.5 g / 1½ oz.)
b
8 fastening bolts (M3)
c
No. 10 Torx wrench
ATTENTION:
Before removing the forearm, make the firearm
safe and unload it. Please observe the general
safety rules in the F16 operating instructions.
f Remove the forearm (see para. 1.3 of the F16
operating instructions).
f Apply the desired number of weights using the
fastening screws to the base support.
f To secure at the final state, secure the screws
using a suitable, removable screw locking
agent.
f 2 small weights at the front
(total weight: 85.0 g / 3 oz.)