Instruction Manual

27
english
10. Case
11. Care and
Maintenance
The double-shell special ABS transportation
case with three locks offers appropriate
storage for the Blaser Drilling, plus scope
and accessories, when travelling.
Rifle case A
For all Blaser single shot rifles and Blaser
bolt action rifle R 93, forearm disassembled,
with scope. External dimensions LxWxH:
70x26x9 cm
Rifle case C
For all Blaser single shot rifles and Blaser
bolt action rifle R 93, forearm assembled.
Featuring additional compartments for
second interchangeable barrel and scope.
External dimensions LxWxH: 78x35x9 cm
Only use products for the care of your rifle,
which are destined for this purpose.
Barrel:
Polish exterior and interior of chamber and
barrel with a suitable gun oil after shooting,
before storing the rifle for prolonged
periods of time, and after carrying the rifle,
especially in humid or wet conditions. Prior
to shooting, barrel and chamber have to be
thoroughly de-oiled again. In case of thick
deposits of bullet residues, we recommend
to use chemical barrel cleaners.
CAUTION:
Under all circumstances, oberserve
instructions and warnings given by the
product manufacturer for use of product.
Metal parts:
Keep all metal parts of the rifle clean and
slightly oiled at all times.
Stock preservative is not suitable for
polishing metal parts!
Stocks:
All wooden stocks of Blaser hunting rifles
are oil-rubbed. We recommend to polish
them regularly with standard stock care
products.
Gun oil is not suitable for stock care!
Optics:
Please refer to care instructions of the
optics manufacturer.
CAUTION:
When oiling hunting rifles, care has to be
taken that no oil or grease gets into the
trigger and action system. Under certain
conditions, oil and grease can resinify
(harden), causing dangerous disruptions of
functioning. Please have your rifle checked
by your specialised dealer prior to each
hunting season or hunting trip. Every rifle
is a piece of technical equipment requiring
regular checks.