Instruction Manual

1.1. 1.2.
20
1. Assembly of the Rifle
Securing barrel set
Only possible with forearm removed
• Seat the front barrel hook onto the hinge
bolt. Due to the tight fit, this requires
care.
• Grip around barrel hook part and action
with one hand, press barrel hook into its
seat, closing the rifle.
• Do not operate locking lever during this
process.
CAUTION:
The breech block must be in its correct
position (slightly inclined forwards). Should
the block be in a vertical position, the barrel
cannot be closed. In this case, press the
locking lever all the way to the right and,
with your other hand, return the breech
block into its forward inclined position.
NOTE:
Securing the barrel requires a certain
amount of skill. Do not use force! We
suggest having this procedure demonstrated
by an expert and practise several times in his
presence.
Installing forearm
• Engage forearm on hinge bolt, flush with
the receiver, and tilt it onto the barrel,
until it reaches the stop.
• The best manner to do this is to lift the
forearm flap with your index finger and
hold it in this position.
• Press in forearm.
• The forearm flap engages.
• Close the forearm flap completely. The
forearm is now locked.