Instruction Manual

77
NOTE:
After firing one or two shots, the cocking
slide (safety slide) remains in its forward po-
sition. When the locking lever is pushed to
the right before breaking the rifle, the
cocking slide (safety slide) jumps back into
the position „uncocked“ (safe) automati-
cally. This is a safety feature but is not the
recommended method of decocking.
CAUTION:
The Blaser 97 models are equipped
with direct pull triggers.
The setting of the trigger pulls can and
may only be altered at the factory.
CAUTION:
Please check the trigger regularly for
smooth movement, with the rifle un -
loaded and uncocked (locked).
Hardened oil and/or contaminations may
affect proper functioning of the trigger
and cause malfunctions.
6. Firing 7. Unloading
7.1.
Unloading the rifle
• Open the rifle.
• When breaking the barrels, the cartridges
are pulled out by the extractor far enough
to be taken out fully by hand.
english