User manual

8
End of Cooking programmer
(fig. 4)
The end of cooking programmer allows the
oven to switch off automatically (it cannot be
used as a timer only).
The cooking duration can be set up to 90
minutes maximum.
Turn the knob to 90, then turn it to the
required cooking time. At the end of the
chosen cooking time the timer clock
automatically switches off the oven. At the
same time an acoustic signal is emitted
which stops automatically.
For manual operation the switch should be
turned in an anti-clockwise direction until the
symbol showing a hand reaches the
corresponding sign «l» then choose the
function required.
Fig. 4
5
10
15
30
45
60
75
90
FO 2474
Once the oven is installed it is important to
remove the protective materials which were
put on in the factory.
- Remove the plastic film from these parts,
then wipe with a soft cloth well wrung out
in warm water to which a little liquid
detergent as been added.
- Then switch the oven control to and
the thermostat control to MAX;
- leave it to run empty for 30 minutes to
burn off any other protective materials.
During this time, an unpleasant odour may
be emitted. This is quite normal.
When the appliance is first
installed