Instructions for the Use and Care and Installation of BRU53X BRU70X Under Cupboard Rangehood.
Dear Customer You will find that the modern look of your Blanco rangehood blends in perfectly with your kitchen décor. It is easy to use and performs to a high standard. Blanco also makes a range of products that will enhance your kitchen – such as cooktops, ovens, dishwashers, microwaves, sinks and taps. There are models to complement your new Blanco rangehood. Blanco now has a range of laundry products to choose from.
82.5 72 396 244 150 15 8 7.5 15 17.5 14 14 260 283 max 90 cm 484 - 664 526 - 706 17.5 Fig.1 B A G Fig.2 Fig.
B J K Fig.4 Fig.5 B A Fig.7 Fig.6 A A1 A2 Fig.
GENERAL Carefully read the following important information regarding installation safety and maintenance. Keep this information booklet accessible for further consultations. The appliance has been designed for use in the ducting version (air exhaust to the outside), filtering version (air circulation on the inside) or with external motor . SAFETY PRECAUTION 1.
The appliance should be embedded into the wall unit or another support. This process should be carried out by using 4 screws suitable for the kind of unit following the instructions for the drilling of the holes as shown in (Fig. 1) Exhausting Version With this type of installation the appliance discharges the vapours externally outside the main wall or an existing exhaust conductor.
Rangehood Installation Exercise care when a rangehood is installed in an area where a gas burner is operating. Depending on the size of the room, the rangehood may draw from the room air that is necessary for proper combustion of the burner. All Blanco rangehoods are used for indoor application only. Rangehoods may be installed in two ways: 1. Ducted to the atmosphere (outside). 2. Recirculating. We recommend ducting to the atmosphere to ensure optimum performance.
C = SPEED I D = SPEED II E = SPEED III F = AUTOMATIC STOP TIMER - 15 minutes (*) • If your appliance has the INTENSIVE speed function, press key E for two seconds and it will be activated for 10 minutes after which it will return to the previously set speed. When the function is active the LED flashes. To interrupt it before the 10 minutes have expired press key E again. • By pressing key F for two seconds (with the hood switched off) the “clean air” function is activated.
