Instructions for the Use and Care and Installation of BRFT7X Twin Motor Rangehood
English WARNING -------------------------------------------------------The distance between the supporting surface for the cooking vessels on the hob and the lower part of the hood must be at least 65 cm. If the instructions for installation for the hob specify a greater distance, this has to be taken into account. For installation over a gas range or gas cooking hob a different specific minimum height requirement may be required by the relevant gas authorities.
DESCRIPTION -------------------------------------------------------The appliance can be used both in Ducting version and Filtering version. In the Ducting version (Fig. 1), cooking vapours and/or odours are conveyed straight outside (ceiling and/or wall) by a disposal duct, using the holes that are predisposed on the top and/or at the back of the apparatus. In the Filtering version (Fig.
Wall cupboard fitting Using the appropriate drilling jig make the four fixing holes into the bottom of the wall cupboard and cut the air venting hole if the hood is a ducting version one (for the filtering version this hole is not necessary). Holding the hood against the bottom of the cupboard fix it to it by means of the supplied four screws (Fig. 8). Fig.
1 2 N 3
4 5 A C S D B 6 A W B C 7 E F P G D G H P H
8 9 C S W 10 A M 12 N P Q R 11 A B C D E
SALES, TECHNICAL, SERVICE AND SPARE PARTS ASSISTANCE NEW SOUTH WALES Head Office, Sales Office and Showroom* 2 Costello Place Seven Hills NSW 2147 PO Box 888 Seven Hills NSW 1730 Telephone: 02 8825 9494 Facsimile: 02 9674 8697 SOUTH AUSTRALIA For sales assistance contact Victorian office Service and Spare Parts All General Whitegoods Service Telephone: 02 9756 1511 Facsimile: 02 9756 1091 WESTERN AUSTRALIA Sales Agent TCB Sales and Marketing 199 Abernathy Road Belmont WA 6104 Telephone: 08 9478 1293 Facs
04306735 - Blanco BRFT7X
