Dimensions Guide
33” 1/8”
F E ATURED M O DEL
518541
33” Front Apron with
9-1/4” bowl depth
F E AT U R E S
• Unique apron front REVERSIBLE design allows for both
contemporary or traditional decors
• Fireclay material allows for perfect, smooth and
easy to clean surface
• Ultra durable surface fired at over 2,100
O
F
• Center drain location
• No template or DXF file provided, recommend use of sink
for determining final cabinet and countertop dimensions
• Limited Lifetime Warranty
• Shown with 3-n-1 drain not included
• Actual weight 91 lbs.
COD E / S TA N DA R D S C O M P LI A N C E
ASME
112.9M-00
WA R R A NT Y
While BLANCO endeavors to provide accurate information, all
dimensions are nominal, cannot be guaranteed, and are subject
to change or cancellation. assumes no responsibility
for use of superseded or voided
MODEL 518541
© 2012 BLANCO
02/11 SPEC-009
BL A NC O
8 0 0. 4 51.57 8 2
www.blanco a m eri c a. c o m
NOM I NAL DIMEN SIO N S
CUTOUT
BOWL DEPTH
DRAIN
OVERALL SIZE FITTING
33” x 19”
Template not available -
Recommend use of actual sink
9-1/4” 3-1/2”
S I NK S PECI F I C ATIONS
BLANCOCERANA™ 33” Front Apron Fire Clay Sink
Model 518541
Blanco America’s BLANCOCERANA
tm
Series sinks
feature a LIMITED LIFETIME WARRANTY to be free
of all manufacturing defects under normal use. See our
complete warranty for details.
838mm 5mm
803mm 5mm
31-1/2” 1/8”
236mm 2.5mm
9-1/4” 3/32”
18mm
3/4”
254mm 3mm
10” 3/32”
3-1/2” DIA
R47
R65
R38
R20
Apron Side B - CONTEMPORARY
R47
R65
R38
R20
483mm 5mm
19” 3/16”
447mm 4mm
17-5/8” 5/32”
Apron Side A - TRADITIONAL
ADDITIONAL M O DELS
518540
518542
30” Front Apron with
9-1/4” bowl depth
Bar Sink
BLANCO
n sink is a reversible style design with different installaon
SPECIAL CARE SHOULD BE
OUT. Please note that both long sides of the apron
one is cut to the appropriate corner radii.
SPECIAL INSTALLATION NOTES -
EXTREME CAUTION: Sinks are extremely heavy. For personal
safety, always use extra personal for moving or installation.
REVERSIBLE FRONT APRON: The BLANCO CERANA apron sink is a
reversible style design with dierent installation dimension
depending on which front apron side you choose to remain
seen after installation. SPECIAL CARE SHOULD BE TAKEN BY THE
COUNTERTOP FABRICATOR TO ENSURE THE CORRECT CUT OUT.
Please note that both long sides of the apron sink have
DIFFERENT RADII corners which will aect the nal installation.
Fabricators should take extra care in conrming which front apron
side of the sink will be after installation to ensure the stone is
cut to the appropriate corner radii.
This installation assumes the use of a custom cabinet & countertop
design. BLANCO recommends that a professional installer be
used. To achieve the desired nished t and form, it is critical that
the cabinet maker, cabinet installer, and countertop fabricator
fully understand the consumer’s requirements regarding the nal
installed look (Either side A or side B facing out).
A custom sink base and support system is required for installation
of BLANCO reclay sinks. The cabinet area beneath the sink MUST
be reinforced to provide sucient support. A wood or metal
support frame for the sink must support 400 pounds.