Instruction Manual

HG-CF-1087 Rev. I – 01.05.13 PAGE 13
TECHNICAL NOTES :-
Removal of Diaphragm Shaft :-
After first removing manifolds and air-hoses, remove both outer covers (26), followed by frontplates (13), diaphragms (12), backplates (10)
and bumpstops (8). Remove air-chamber assy, by removing nuts & bolts as at (27) & (28). This allows access to locknuts (42) to remove air
diaphragm, backplates & thrust washer (41), (40) & (39). Diaphragm Shaft can now be removed. Assembly is reverse of removal, applying a small amount of Loctite grade 242 to locknuts prior to refitting air-chamber assy.