Manual
HG-CF-1184 Rev. C, 16/11/12 Page 10
PARTS LIST - cont.
PUMPS FITTED WITH PTFE DIAPHRAGMS
REF
No.
PART
NUMBER
QTY
30 1A071 DIAPHRAGM - (PTFE)
2
31 1A089 DIAPHRAGM - (BACK-UP)
2
DESCRIPTION
ELASTOMER TABLE
REF
No.
DESCRIPTION BUNA-N EPDM VITON NEOPRENE ONE-PIECE
PTFE
ST.
STEEL
QTY
4 O-RING - (VALVE SEAT) G057 G060 G061 G059 - - 8
10 VALVE BALL 1A049 1A080 1A081 1A079 - 1A197 4
10 VALVE BALL - (WEIGHTED) 1A072 1A092 1A093 1A091 - - 4
31 DIAPHRAGM 1A006 1A040 1A039 1A057 1A385 - 2
ELASTOMER TABLE - cont.
REF
No.
DESCRIPTION PTFE POLYESTER SANTOPRENE
®
DELRIN
(ACETAL)
POLYURE-
THANE
QTY
4 O-RING - (VALVE SEAT) G058 - - - - 8
10 VALVE BALL 1A002 - - 1A050 - 4
10 VALVE BALL - (WEIGHTED) - - - - - 4
31 DIAPHRAGM SEE TABLE 1A061 1A358 - 1A070 2
- These items are available in a recommended wet side spares kit. Please refer to your local stockist / distributor for details.
- These items are available in a recommended spares kit - ASK2505 - Air side Kit - (All models)
- All models are Lube Free as standard, - LF options are only required for very dry air, or “clean room” applications.
- These items are available as a sub-assembly spare - SA10585 - Valve Block Assembly.
Santoprene is a registered tradename of Monsanto Corp.
NOTE! For additional Atex parts see page 7
PARTS LIST
PART NUMBER
WETTED COMPONENTS
Ref
No.
Cast Iron Stainless
Steel
Aluminium
/ Common
Atex
Cat. 2
Description Qty
1 A040 A005 BOLT - M8 x 35
8
2 C044 C013 WASHER - M8
8
3 25-138 25-140 25-121 DISCHARGE MANIFOLD
1
4 SEE TABLE O-RING
8
5 40-047 40-240 SILENCER
1
6 1A004 VALVE SEAT
4
7 1A075 1A035 1A005 OUTER COVER
2
8 A035 A006 BOLT - M8 x 40
16
9 B506 B505 FLANGED NUT - M8
24
10 SEE TABLE VALVE BALL
4
11 25-137 25-139 25-120 SUCTION MANIFOLD
1
12 - - 40-259 VALVE CHEST
1
13 40-204 GASKET
1
14 40-005 VALVE PLATE
1
15 40-004 SLIDE VALVE
1
16 40-264 VALVE BLOCK
1
17 D391 SKT. CAP SCREW - M5 x 14
4
18 40-266 VALVE BLOCK PLUG
2
19 G512 O-RING
2
20 40-192 VALVE CARRIER
1
21 D267 D337 SKT. CAP SCREW - M8 x 40
4
22 C173 C165 SPRING WASHER - M8
4
23 25-091 DIA. SHAFT SEAL (SEE NOTE )
6
24 25-089 DIAPHRAGM SHAFT BUSH
2
25 G189 O-RING
2
26 G245 O-RING
2
27 G367 O-RING
2
28 25-160 DIAPHRAGM SHAFT
1
29 SA10104 SA10104 SA10502 FRONTPLATE ASSEMBLY
2
30 SEE PUMPS FITTED WITH PTFE ABOVE !
31 SEE TABLE DIAPHRAGM
2
32 1A007 1A259 1A007 BACKPLATE
2
33 D310 D028 SKT. CAP SCREW - M8 x 25
8
34 - - 25-182 INNER COVER
2
35 G242 O-RING
2
36 G243 O-RING
2
37 G339 O-RING
8
HEAVY DUTY OPTION - 1A205
NOTES :