Owner manual

avbmdl1sm-rev0111 Model AVB Metallic Page 10



• Check for excessive varying environmental pumping conditions
(changing head or suction)
• Check ice buildup in exhaust area
• Inspect sleeve and spool set for damage
• Make sure patch cable plug is connected and locked

• Consult Factory After Sales Support Team


• Make sure patch cable plug is connected and locked
• Check ice buildup in exhaust area

• Consult Factory After Sales Support Team



• Make sure patch cable plug is connected and locked
• Cycle the power off/on to the control module

• Consult Factory After Sales Support Team
• Cycle the power switch on the control module off/on




• Has product migrated to the sensor?

• If the sensor has been submerged in product, the sensor will need to be
replaced. Consult the AirVantage servicing section of the manual for detailed instructions.

• Has product contaminated the poppet valve?

• If a signicant amount of product has made it into the poppet valve, then the unit will
need to be disassembled for inspection. Consult the AirVantage servicing section (p.22).
VALVE, POPPET
VALVE, SOLENOID
CAPSCREW, HEX SOC HD, 10-32 X .50
COVER
SEAL, O-RING
SEAL, O-RING
MUFFLER
SEAL, O-RING
ASSEMBLY, POWER GENERATOR
CAPSCREW, HEX SOC HD, 10-32 X 2.25
SEAL, O-RING
CAPSCREW, HEX SOC HD, 10-32 X 1.00
CAPSCREW, HEX SOC HD, 10-32 X .50
O-RING
O-RING
CONTROL MODULE
REGULATOR
Optional 1/4" NPT Pipe Plug (P/N 618.011.330)
Must be installed if performing direct spray
wash-down of pump (Purchased Separately)