User guide

ManualsBrandsBlagdon Pump ManualsPumpsAP50 Submersible

MANUAL AND PARTS LIST

AP50

SUBMERSIBLE

DISTRIBUTOR

IMPORTANT

This pump should be used in accordance with the requirements of the Safety, Health & Welfare at Work Act 2005.

All business conducted subject to IDEX Pump Technologies, Ireland. Terms and Conditions of Sale, available on request.

HG-CF-826 (Rev I)

IDEX Pump Technologies (Ireland) Ltd.,

A Unit of IDEX Corporation,

R79, Shannon, Co Clare, IRELAND.

TEL. : +353 61 471933 FAX. : +353 61 475046

Web Site : www.blagdonpump.com

E-Mail : sales@blagdonpump.com

Summary of content (12 pages)

PAGE 1
MANUAL AND PARTS LIST AP50 SUBMERSIBLE DISTRIBUTOR IMPORTANT This pump should be used in accordance with the requirements of the Safety, Health & Welfare at Work Act 2005. All business conducted subject to IDEX Pump Technologies, Ireland. Terms and Conditions of Sale, available on request. IDEX Pump Technologies (Ireland) Ltd., A Unit of IDEX Corporation, R79, Shannon, Co Clare, IRELAND. TEL. : +353 61 471933 FAX. : +353 61 475046 Web Site : www.blagdonpump.com E-Mail : sales@blagdonpump.
PAGE 2
AP50 AIR POWERED CENTRIFUGAL PUMP 1. OPERATION 1.1 Check level of oil in reservoir by removing oil filler plug (36). An SAE 20 mineral based oil or equivalent is recommended. Caution Care should be taken when working with oils & greases, they should be handled in accordance with good standards of industrial hygiene and safety practices. Use a barrier cream, wear pvc or neoprene gloves and overalls. Regular changes of contaminated clothing is recommended. 1.
PAGE 3
increase oil flow. Replace lockscrew (26) to protect oil feed screw from damage. 2.2 There are two grease lubrication points on the pump, both use a Castrolease CL Light, or equivalent grease. The upper grease nipple (67) only requires one push of the grease gun per month to lubricate the governor mechanism. the lower grease nipple, supplying the lower pump bearings and pump seals may be generously filled.
PAGE 4
3.2 Check freedom of movement of the upper governor section (48) together with governor balls (31) & ball cage (30). Check for wear or damage and replace as required. 3.3 Ensure that governor valve (45) is free by pushing against the spring (44). If excessive wear is suspected, remove air hose union (40) and withdraw governor valve. Check both valve (45) and cylinder (34) bore for wear or damage and replace as required. If o-rings (35) & (46) are damaged or attacked, replace as required. 3.
PAGE 5
Pump Body 3.9 Remove governor housing and air motor as previously described. Remove bolts (7) from volute (2) and lift pump body assembly free. 3.10 Turn pump body over, lock impeller and remove nut (81) together with impeller (3) from intermediate section (16). 3.11 Remove bolts (76) and withdraw bearing housing assembly (8) from intermediate section (16). 3.12 Turn impeller shaft (74) and check for ease of movement and quality of impeller bearing (11). Replace bearings as required. 3.
PAGE 6
PAGE 7
PAGE 8
PARTS LIST REF No PART No. 1 AP50.60 STRAINER DESCRIPTION MATERIAL QTY S.G. IRON 1 2 AP50.55 3 AP50.57 VOLUTE CAST IRON 1 IMPELLER GUNMETAL 4 AP50.56 VOLUTE SHIM (0.010”) 1 PLASTIC A/R 5 AP50.56A VOLUTE SHIM (0.015”) 6 AP50.52 SEAL PLASTIC A/R NBR/ST.STEEL 2 7 A135 HEX. HEAD BOLT - M10 x 25 HT. STEEL 4 8 AP50.51 BEARING HOUSING CAST IRON 1 9 AP50.43 BUSH MANGANESE BRONZE 1 10 AP50.42 BEARING NUT STEEL PLATED 1 11 AP50.
PAGE 9
REF No. PART No. MATERIAL QTY 42 Z100 BLANKING PLUG DESCRIPTION PVC 1 43 AP50.76 GOVENOR SHIM STEEL A/R 44 AP50.06 GOVENOR SPRING STEEL 1 45 AP50.07 GOVENOR VALVE STEEL 1 46 AP50.08 O-RING NITRILE 1 47 AP50.10 CIRCLIP HT. STEEL 1 48 AP50.16 UPPER GOVENOR SECTION STEEL 1 49 AP50.75 LOCATING DOWEL STEEL 1 50 AP50.14 GOVENOR HOUSING CAST IRON 1 51 AP50.26 CYLINDER BOLT HT. STEEL 5 52 AP50.21 UPPER BEARING STAINLESS STEEL 1 53 AP50.
PAGE 10
DIMENSIONS
PAGE 11
TECHNICAL DATA Max. Delivery : 34 M3/hr (125 psi) Weights :- Max. Working Pressure : 8.6 bar (125 psi) Pump : 32.0 Kg Max. Solid Particle Size : 6mm Shipping (Boxed) : 33.
PAGE 12
Service / Maintenance Log Date Details Completed Contact Information Contact Phone / Fax No.