Owner`s manual

STEP 5

Please remove the M8xP1.25x20L

Screws (H-3) and Flat Washers (H-

2) on the Main Frame (B), then

insert the slide rail (H-12) to the

main frame (B) and attach using

M8xP1.25x20L Screws (H-3) and

Flat Washers (H-2).

Remarks: Do not screw one set of

the M8xP1.25x20L Screws and Flat

washers too tightly at one time. It

is better to x the eight sets rmly

at the same time to allow you to

change angles and to level easily.

STEP 6

Plug the Adaptor (M) into the DC wire hole (B-14) to start the computer