Owner`s manual

13
ASSEMBLY INSTRUCTIONS
STEP 1
Fit the Front Stabilizer (F) to the Main Frame
(B) and secure it with 2 of M8xP1.25x55L
Carriage Bolts (I-1), 2 Flat Washers (I-2), and
two Nuts (I-3). Make sure they are securely
tightened.
STEP 2
Fit Pedal Holder (E) to the Main Frame (B)
and secure it with 4 M8xP1.25x20L Screws
(I-4) and 4 Flat Washers (I-2).
Remarks: Do not screw one set of the
M8xP1.25x20L Screws and Flat Washers too
tightly at one time. It is better to x the four
sets rmly at the same time to allow you to
change angles and to level easily.