User manual

Bladelius Embla Basic User Manual
Basic operation - Display currently played album
© 2008 by Bladelius Design Group. All rights reserved
9
Display currently played album
Press the “Return” button on the remote control to display the track list of the
album being played.
Display information about the currently played track
Press “Time” button on the remote control, or select the “Information” button in
the setup menu on the display, to display information about the track being
played.
Leave the menu
Press the “Return” button on the remote control, or step backwards in the menu
system with the left arrow button until you leave the menu.
Play a CD
Place a disc in the Embla drive. The system might prompt you that a new disk is
available for backup. Press return on the remote control to cancel the prompt. If
you want to have this prompt removed, you can set it up under settings in the
menu. Select the “CD playback” button in the “Audio playback menu” toolbar.
Press play, and the disc will start to play.
Play and pause playback of music
Use the “Play” button on the remote control to start or to continue playback.
Use the “Pause” button on the remote control to pause playback.
Play fast forward and fast reverse
Use the fast forward ( ) button on the remote control to search fast forward.
Use the fast reverse ( ) button on the remote control to search fast backward.
Play music from an external digital source
There are four external digital inputs to play music from; balanced input
(AES/EBU), unbalanced input (Coax), optical input (toslink) and USB input
(computer). Select between the inputs by pressing the source+ or source-
buttons on the remote control.