User Manual


FollowingtheWizard
ThewizardisusedprimarilytolettheVortexlearntheflightchannelorder,andR/CTxmode(1,
2,3,4).‘Left’referstomovingthestickleft,and‘Back’referstomovingthestickbacktowards
you.

Followtheprompts,
ensuringthatthecorrect
stickismovedeachtime.
Aseachcontrolis
recognized,it’snamewill
appeartotheleftofthe
servobar.

Takeyourtimewiththisstep,ifthewrongstickmovementsarefedtothewizard,itwillbe
difficulttonavigatetheOSDtocompletethesetup.


Oncethefourprimaryflight
controlshavebeenlearned,
placethequadonaflatand
levelsurfaceandmovethe
rightstickback.Thiswill
calibratethe
accelerometer.
Itisimportantthatthequad
islevelwhenthisstepis
performed,ortheauto-level
flightmodeswillnot
functioncorrectly.





12

