BLH04150 Scimitar Quadcopter Manual

15
EN
On Screen Display (OSD)
This aircraft includes an On Screen Display (OSD)
integrated into the Betaflight F3 flight controller.
The OSD shows the Flight Mode, a timer, and
voltage. A call sign is also available on the OSD, it
is recommended to display your HAM call sign to
satisfy amateur radio rules.
OSD Menu
The OSD has a menu system which has options
where the pilot can make changes.
1. To enter the menu the motor must be
disarmed.
2. Move the control sticks to half throttle, full
left yaw, and full forward elevator, as shown
(Mode 2 shown).
3. To navigate the menu use elevator stick to move up and down through the menu, and aileron
stick to move side to side through the menu.
Important: The throttle must remain about half stick while in the OSD menu
or the flight controller will automatically exit the menu
Flight Mode
Callsign
Voltage
Signal
AIR DISARMED
10.9V
4:27
SCIMITAR
40
Motor Status