BLH04150 Scimitar Quadcopter Manual

14
EN
Spektrum VTX Control
Spektrum control signals include a special command system to manage frequencies and power
output on video transmitters. This aircraft has a video transmitter which can be controlled from
compatible Spektrum Transmitters with Spektrum AirWare™ firmware:
To apply changes to the video transmitter
1. Power on the video transmitter and ensure it is properly connect to the aircraft receiver.
2. From the Model Adjust menu, select Video Tx.
3. Adjust the Band, Channel frequency, Power level and Mode to the desired values. Pit mode sets the
video transmitter output to very low power for testing in the pits. Do not attempt to fly using pit mode.
Race mode sets the video transmitter output to normal power.
4. Select SEND to apply the changes. The video transmitter must be properly connected and
powered on to apply changes.