Ozone RTF BNF Basic Manual

RTF

Change ﬂ ight modes by pushing down on the right stick. Ensure the ﬂ ight mode switch is in the

desired position before ﬂ ying.

• In Stability Low Bank Angle mode (switch position 0), the controls provide a minimum bank

angle. This mode is shown by the front and rear ﬂ ight control LEDs on the quadcopter

glowing solid green.

• Agility mode (switch position 2) is shown by the front and rear ﬂ ight control LEDs on the

quadcopter glowing solid red.

If you purchased a BNF Ozone

™

quadcopter, the channel 5 switch on your transmitter will select ﬂ ight modes.

Flight Mode Selection

LED Codes

Equipment LED Color LED Status Operation

Quadcopter:

Front/Rear ﬂ ight

control LEDs on the

control board

Green Solid Stability Low Bank Angle mode, switch position 0

Blue

Solid Stability High Bank Angle mode, switch position 1

Blinking Loss of RF / Transmitter OFF

Red

Solid Agility mode, switch position 2

Blinking Low Battery

White Blinking Disarmed, Ready

Quadcopter:

Outer motor pod LEDs

White (Front)

Red (Rear)

Slowly Dim and Brighten In relation to throttle input