Blade mCX2 Manual

4
5
Blade
®
mCX2 RTF Contents
Item Description
Not Available Separately ....Blade mCX2 RTF Airframe
EFLH1064B ............. MLP4DSM 4-Channel Transmitter, 2.4GHz DSM2
EFLB1201S .............120mAh 1-Cell 3.7V Li-Po
EFLC1000 ..............1-Cell 3.7V Li-Po Charger, 0.3A
EFLH1209 ..............Screwdriver
Not Available Separately ....8 AA Batteries
(Optional) FUG4 . . . . . . . . . . 4 AA Batteries
Blade mCX2 BNF Contents
Item Description
Not Available Separately ....Blade mCX2 RTF Airframe
EFLB1201S .............120mAh 1-Cell 3.7V Li-Po
EFLC1000 ..............1-Cell 3.7V Li-Po Charger, 0.3A
EFLH1209 ..............Screwdriver
Not Available Separately ....4 AA Batteries
(Optional) FUG4 . . . . . . . . . . 4 AA Batteries
Note: These checklists are not intended to be a replacement for the content
included in this instruction manual. Although they can be used as a quick
start guide, we strongly suggest reading through this manual completely
before proceeding.
First Flight Preparation
Remove and inspect contents•
Install four of the included AA batteries in the charger•
Begin charging the flight battery•
Install the remaining four AA batteries in the transmitter (RTF ONLY)•
Install the flight battery in the helicopter (once it has been fully charged)•
Test the controls•
Familiarize yourself with the controls•
Find a suitable area for flying•
Flying Checklist
Always turn the transmitter on first ❏
Plug the flight battery into the lead from the 5-in-1 control unit ❏
Allow the 5-in-1 control unit to initialize and arm properly ❏
Fly the model ❏
Land the model ❏
Unplug the flight battery from the 5-in-1 control unit ❏
Always turn the transmitter off last ❏