Blade mCP S Manual

6
EN
FUNCTION LIST
DX7s, DX8
F-Mode Setup
Flight Mode F Mode
Hold Hold
SETUP LIST
Swash Type
1 servo Normal
Model Type
HELI
SW Select
Trainer Aux 2
F Mode Gear
Gyro INH
Mix INH
Hold INH
Knob INH
Frame Rate
11ms
DSMX
D/R & Expo
Chan
Switch Pos
(Ail D/R)
D/R ExpoDX7s DX8
AILE
0 100/100 +25
0 1 100/100 +25
1 2 75/75 +25
ELEV
0 100/100 +25
0 1 100/100 +25
1 2 75/75 +25
RUDD
0 100/100 +25
0 1 100/100 +25
1 2 75/75 +25
Timer
Mode Count Down
Time 4:00 Tone
Start Throttle Out
Over 25%
Chan Travel Reverse
THR 100/100 Normal
AIL 100/100 Normal
ELE 100/100 Normal
RUD 100/100 Normal
Chan Travel Reverse
GER 100/100 Normal
PIT 100/100 Normal
AX2 100/100 Normal
Servo Setup
Throttle Curve
Switch Pos
(F Mode)
Pt 1 Pt 2 Pt 3 Pt 4 Pt 5DX7s DX8
N N 0 25 50 75 100
1 1 100 80 75 80 100
2 100 100 100 100 100
Pitch Curve
Switch Pos
(F Mode)
Pt 1 Pt 2 Pt 3 Pt 4 Pt 5DX7s DX8
N N 30 40 50 75 100
1 1 0 25 50 75 100
2 0 25 50 75 100
HOLD HOLD 25 37 50 75 100
Throttle Cut
Throttle 0%
Gyro
INH
Mixing
Channels AUX2 > GER
Rate 100% 20%
Offset 100%
Trim INH
Position NIHM
Panic Mode Operation
Trainer/Bind Button
Pressed = Panic Mode On
Released = Panic Mode Off
Program your transmitter before attempting to bind or fl y
the helicopter. Transmitter programming values are shown
below for the Spektrum DX7s, DX6, DX7, DX8, DX9, DX18
and DX20.
The fi les for models using Spektrum
™
transmitters
with Spektrum AirWare
™
software are also available for
download online at www.spektrumrc.com.
DXe
To use the Spektrum
™
DXe transmitter, download the Blade
®
mCP S DXe model setup available at www.spektrumrc.com
or use the appropriate programming cable and the PC or
mobile app to program the transmitter.
Transmitter Setup (BNF)
Flight Mode Operation
F MODE Sw: Pos 0 = Stability Mode
Pos 1 = Intermediate Mode
Pos 2 = Agility Mode