Inductrix FPV + Manual
25
EN
Changing the Center LED Taillight Color
To change the color of the center LED taillight:
1. Power on the transmitter.
2. Power on the quadcopter. DO NOT arm the motors.
3. Push both transmitter sticks fully forward and hold for 3 seconds.
The taillight on the quadcopter will ash continuously.
4. Push the aileron stick right or left to choose the desired taillight color.
5. Pull both transmitter sticks fully back and hold for 1 second to save
the desired color. The taillight will now display the chosen color
continuously. It will show the active ight mode for approximately
1second after changing ight modes.
To reset the taillight to the default flight mode indicator color mode:
1. Power on the transmitter.
2. Power on the quadcopter. DO NOT arm the motors.
3. Pull both transmitter sticks fully backward and hold for 5 seconds.
The taillight will change color to the active ight mode.