Inductrix FPV + Manual

21
EN
Flight Mode Selection
Cycle between the ight modes by changing the position of the ight
mode switch as programmed in the binding section above. The active
ight mode is indicated by the LED taillight on the quadcopter*.
•A ltitude mode (green LED, switch position 0): maintains
altitude. The bank angle is limited. When the sticks are released,
the quadcopter will return to level ight.
•S tability mode (blue LED, switch position 1): the bank angle is
limited. When the sticks are released, the quadcopter will return to
level ight.
•A gility mode (red LED, switch position 2): the quadcopter has
no bank angle limits and will not return to level ght if the sticks are
released. Use rates and expo to tune the performance according to
your ying style.
•M eow Mode
™
(trigger switch (RTF), button I (BNF)): ips the
quadcopter upright if it lands upside down after a crash by reversing
the motors on one side. Press the switch once to disarm the motors.
Press again to activate Meow Mode to ip the quadcopter upright.
* The LED taillight only indicates the active ight mode continuously if
the color mode of the LED has not been changed. See Changing the
LED Taillight Color for more information.