User Instructions

BLH7840 USB Firmware Update Cable
Instruction Manual | Bedienungsanleitung | Manuale di Istruzioni
Contents |Inhalt | Contenuto
®
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date
product literature, visit horizonhobby.com and click on the support tab for this product.
Meaning of Special Language
The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR
create a high probability of super cial injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to
operate the product correctly can result in damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability.
Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product
is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any
way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is
essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and
avoid damage or serious injury.
What this Warranty Covers
Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the
product purchased (the “Product”) will be free from defects in materials
and workmanship for a period of 1 year from the date of purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic
damage, (ii) damage due to acts of God, accident, misuse, abuse,
negligence, commercial use, or due to improper use, installation,
operation or maintenance, (iii) modi cation of or to any part of the
Product, (iv) attempted service by anyone other than a Horizon Hobby
authorized service center, (v) Product not purchased from an authorized
Horizon dealer, or (vi) Product not compliant with applicable technical
regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO
OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED
THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF
THE PURCHASER’S INTENDED USE.
Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy
shall be that Horizon will, at its option, either (i) service, or (ii) replace,
any Product determined by Horizon to be defective. Horizon reserves
the right to inspect any and all Product(s) involved in a warranty claim.
Service or replacement decisions are at the sole discretion of Horizon.
Proof of purchase is required for all warranty claims. SERVICE OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT,
NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY,
EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. Further, in no event shall the liability of Horizon exceed the
individual price of the Product on which liability is asserted. As Horizon
has no control over use, setup,  nal assembly, modi cation or misuse,
no liability shall be assumed nor accepted for any resulting damage
or injury. By the act of use, setup or assembly, the user accepts all
resulting liability. If you as the purchaser or user are not prepared to
accept the liability associated with the use of the Product, purchaser is
advised to return the Product immediately in new and unused condition
to the place of purchase.
Law
These terms are governed by Illinois law (without regard to con ict of
law principals). This warranty gives you speci c legal rights, and you
may also have other rights which vary from state to state. Horizon
reserves the right to change or modify this warranty at any time without
notice.
WARRANTY SERVICES
Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide
warranty support or service. Once assembly, setup or use of the
Product has been started, you must contact your local distributor or
Horizon directly. This will enable Horizon to better answer your questions
and service you in the event that you may need any assistance. For
questions or assistance, please visit our website at www.horizonhobby.
com, submit a Product Support Inquiry, or call the toll free telephone
number referenced in the Warranty and Service Contact Information
section to speak with a Product Support representative.
Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the
country you live and use the Product in, please use the Horizon Online
Service Request submission process found on our website or call
Horizon to obtain a Return Merchandise Authorization (RMA) number.
Pack the Product securely using a shipping carton. Please note that
original boxes may be included, but are not designed to withstand the
rigors of shipping without additional protection. Ship via a carrier that
provides tracking and insurance for lost or damaged parcels, as Horizon
is not responsible for merchandise until it arrives and is accepted
at our facility. An Online Service Request is available at http://www.
horizonhobby.com/content/_service-center_render-service-center.
If you do not have internet access, please contact Horizon Product
Support to obtain a RMA number along with instructions for submitting
your product for service. When calling Horizon, you will be asked to
provide your complete name, street address, email address and phone
number where you can be reached during business hours. When
sending product into Horizon, please include your RMA number, a list of
the included items, and a brief summary of the problem. A copy of your
original sales receipt must be included for warranty consideration. Be
sure your name, address, and RMA number are clearly written on the
outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have
any issue with a LiPo battery, please contact the appropriate
Horizon Product Support offi ce.
Warranty Requirements
For Warranty consideration, you must include your original
sales receipt verifying the proof-of-purchase date. Provided
warranty conditions have been met, your Product will be serviced or
replaced free of charge. Service or replacement decisions are at the
sole discretion of Horizon.
Non-Warranty Service
Should your service not be covered by warranty, service will be
completed and payment will be required without notifi cation
or estimate of the expense unless the expense exceeds 50%
of the retail purchase cost. By submitting the item for service you
are agreeing to payment of the service without noti cation. Service
estimates are available upon request. You must include this request
with your item submitted for service. Non-warranty service estimates
will be billed a minimum of ½ hour of labor. In addition you will be billed
for return freight. Horizon accepts money orders and cashier’s checks,
as well as Visa, MasterCard, American Express, and Discover cards. By
submitting any item to Horizon for service, you are agreeing to Horizon’s
Terms and Conditions found on our website http://www.horizonhobby.
com/content/_service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in
the country of use and ownership. If received, a non-compliant
Product will not be serviced. Further, the sender will be
responsible for arranging return shipment of the un-serviced
Product, through a carrier of the sender’s choice and at the
sender’s expense. Horizon will hold non-compliant Product
for a period of 60 days from notifi cation, after which it will be
discarded.
Age Recommendation: Not for children under 14 years. This is not a toy.
1 Year Limited Warranty
Warranty and Service Contact Information
Country of
Purchase
Horizon Hobby Contact Information Address
United States of
America
Horizon Service Center
(Repairs and Repair Requests)
servicecenter.horizonhobby.com/
RequestForm/
4105 Fieldstone Rd
Champaign, Illinois, 61822 USA
Horizon Product Support
(Product Technical Assistance)
www.quickbase.com/db/
bghj7ey8c?a=GenNewRecord
888-959-2304
Sales
[e-mail]
888-959-2304
United Kingdom
Service/Parts/Sales:
Horizon Hobby Limited
[e-mail]
Units 1–4 , Ployters Rd, Staple Tye
Harlow, Essex, CM18 7NS, United Kingdom
[phone]
Germany
Horizon Technischer Service [e-mail]
Christian-Junge-Straße 1
25337 Elmshorn, Germany
Sales: Horizon Hobby GmbH [phone]
France
Service/Parts/Sales:
Horizon Hobby SAS
[e-mail]
11 Rue Georges Charpak
77127 Lieusaint, France
[phone]
China
Service/Parts/Sales:
Horizon Hobby – China
[e-mail]
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060
[phone]
Included Items:
• USB Dongle
• Servo Lead Extension
• JST-SHR Extension
Tools Required:
• Hemostats or Needle Nose Plier
Lieferumfang
• USB Dongle
• Servokabelverlängerung
• JST-SHR Verlängerung
Benötigtes Werkzeug
• Spitzzange oder Pinzette
Articoli inclusi:
• Adattatore USB
• Prolunga cavo servo
• Prolunga JST SHR
Attrezzi richiesti:
• Pinza a becchi stretti
EN
EN
DE
IT
DE
IT
Updating the Firmware | Upaten der Firmware | Aggiornamento del Firmware
1. Go to the Blade 350 QX product page on HorizonHobby.com:
http://www.horizonhobby.com/products/350-qx-bnf-with-safe-
technology-BLH7880.
2. Download the Firmware 2.0 update zip  le.
3. Extract the  les from the zip  le.
4. Install the driver in the zip  le for the USB dongle.
5. Connect the USB dongle to a
USB port on your computer.
Ensure no other devices are
connected to a USB port.
6. Using a needle nose plier
or hemostats, connect the
JST-SHR extension to the
JST-SHR port in your 350 QX.
7. Connect the USB dongle to
the extension.
8. Open the Firmware Updater appropriate for your computer
operating system.
9. Select “Choose File” and
select the 350 QX FW
2.0.bin  le in the folder.
10. Select the second COM
option in the dropdown
menu in Port.
Do not select COM1.
11. Select “Wait For Device
and Upload Firmware.”
12. Connect a charged  ight battery to the 350 QX and power it ON
within 60 seconds.
13. When the update is
complete, a screen will
prompt: “Device was
upgraded successfully.
Please disconnect and
reset device.”
Select OK.
14. Power OFF the 350 QX and disconnect the dongle, leaving the
extension in the aircraft.
If the update fails, repeat the above procedure.
1. Bitte gehen Sie zu der Blade 350 QX Produktseite auf
HorizonHobby.com: http://www.horizonhobby.com/products/350-
qx-bnf-with-safe-technology-BLH7880.
2. Laden Sie die Firmware 2.0 update zip Datei als Download.
3. Extrahieren Sie die Dateien aus der ZIP Datei.
4. Installieren Sie den Treiber für das USB Dongle aus der ZIP Datei.
5. Schließen Sie das USB Dongle
am USB Anschluss ihres
Computer an. Bitte achten Sie
darauf, dass keine weiteren
USB Geräte an ihrem Rechner
angeschlossen sind.
6. Stecken Sie mit Hilfe der
Spitzzange oder Pinzette die
JST-SHR Verlängerung in den
JST-SHR Anschluss auf der
Platine des Blade 350QX ein.
7. Schließen Sie das USB
Dongle an die Verlängerung
an.
8. Öffnen Sie das für ihr Betriebssystem geeignete
Updateprogramm.
9. Wählen Sie “Choose File”
und wählen die 350 QX
FW 2.0.bin Datei aus
dem Verzeichnis.
10. Wählen Sie die zweite
COM Port Auswahl in
dem Dropdown Menü.
Wählen Sie NICHT
COM1.
11. Wählen Sie “Wait for
Device and Upload
Firmware.”
12. Schließen Sie einen geladenen Flugakku an den 350QX an und
schalten den Copter innerhalb von 60 Sekunden ein.
13. Ist das Update
erfolgreich
abgeschlossen,
erscheint die Meldung:
“Device was upgraded
successfully. Please
disconnect and reset
device.” Drücken Sie auf OK.
14. Schalten Sie den 350QX aus und trennen das Dongle. Lassen
Sie die Verlängerung in dem Stecker eingesteckt.
Sollte das Update nicht erfolgreich sein wiederholen Sie den
beschriebenen Vorgang.
1. Andare alla pagina del Blade 350 QX su HorizonHobby.com
http://www.horizonhobby.com/products/350-qx-bnf-with-safe-
technology-BLH7880.
2. Scaricare il  le zip di aggiornamento del Firmware 2.0.
3. Estrarre i  les dal  le zip.
4. Installare il driver per l’adattatore USB (che si trova nel  le zip).
5. Collegare l’adattatore USB
alla porta USB del computer.
Accertarsi che non ci siano
altre apparecchiature
collegate alla porta USB.
6. Usando una pinza a becchi
stretti, collegare la prolunga
JST-SHR alla presa JST-SHR
sul 350 QX.
7. Collegare l’adattatore USB
alla prolunga.
8. Aprire il programma di aggiornamento del Firmware adatto al
sistema operativo del proprio computer.
9. Scegliere “Choose File”
e selezionare il  le 350
QX FW 2.0.bin nella
cartella.
10. Scegliere la seconda
opzione COM nel menu
a tendina in Port. NON
scegliere COM1.
11. Selezionare “Wait For
Device and Upload
Firmware”.
12. Collegare al 350 QX una batteria carica e accenderlo entro 60
secondi.
13. Quando l’aggiornamento
è completato, appare
una schermata con:
“Device was upgraded
successfully. Please
disconnect and reset
device.”
Selezionare OK.
14. Spegnere il 350 QX e scollegare l’adattatore, lasciando però
la prolunga collegata al velivolo.
Se l’aggiornamento fallisce, ripetere tutta la procedura.
Declaration of Conformity
(in accordance with ISO/IEC 17050-1)
No. HH2014050701
Product(s): USB: Multi Rotor Programmer
Item Number(s): BLH7840
The object of declaration described above is in conformity with
the requirements of the speci cations listed below, following the
provisions of the EMC Directive 2004/108/EC:
EN55022:2010 + AC:2011
EN55024:2010
Signed for and on behalf of:
Horizon Hobby, LLC.
Champaign, IL USA
May 07, 2014
Instructions for disposal of WEEE by users
in the European Union
This product must not be disposed of with other
waste. Instead, it is the user’s responsibility to dispose
of their waste equipment by handing it over to a
designated collections point for the recycling of waste
electrical and electronic equipment. The separate
collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health
and the environment. For more information about where you can
drop off your waste equipment for recycling, please contact your
local city of ce, your household waste disposal service or where
you purchased the product.
Compliance Information for the European Union
Robert Peak
Chief Financial Of cer
Horizon Hobby, LLC