230 S V2 Manual

12
EN
Telemetry Based Text Generator for Advanced Settings
Advanced parameters may be easily read in text form
when using a Spektrum
™
telemetry based transmitter.
Transmitters may require a fi rmware update to access this
function. To register and update Spektrum™ transmitters,
visit www.spektrumrc.com.
Turning On Text Gen
Access the Telemetry menu, select one of the “Empty”
Telemetry slots and scroll to select “Text Gen.” Set the
display option to active (Act). Once the Text Gen message
feature has been enabled, the transmitter will display text
based menus on the telemetry screens for adjusting PID
values and servo center points. The helicopter must be
bound and initialized for the Text Gen screen to function;
scroll from the home screen past the telemetry screen(s) to
access the Text Gen screen.
Using Text Gen
The available features and stick inputs used to manipulate
the menus are the same as the methods outlined in the
following section, but using the text based programming is
more intuitive. Refer to the transmitter manual for details
on how to utilize telemetry menus.
Advanced Settings
The 230 S V2 default settings are appropriate for most
users. We recommend fl ying with the default parameters
before making any adjustments.
WARNING: To ensure your safety, always
disconnect the motor wires from the ESC
before performing the following steps. After you have
completed the adjustments, reconnect the motor wires
to the ESC before attempting to fl y the model.