User Manual

6
EN
Transmitter Setup Table (BNF)
Panic Mode Operation
Trainer/Bind Button
Pressed = Panic Mode On
Released = Panic Mode Off
Transmitter
Model
Type
Setup / Channel
Assignments Reversing Setup Flight Modes
Dual
Rates
High
Rate
Low
Rate Other Settings
DX4e (New)
w/ 3 Position
Switch
N/A MIX=NOR All channels = NORM
CH 5 Pos 0 =
Stability
Ail/Ele/Rud
100%
Fixed
70%
Fixed
CH 5 Pos 1 =
Intermediate
CH 5 Pos 2 =
Agility
DX5e (New)
w/ 3 Position
Switch
N/A MIX=NOR All channels = NORM
CH 5 Pos 0 =
Stability
Ail/Ele/Rud
100%
Fixed
70%
Fixed
CH 5 Pos 1 =
Intermediate
CH 5 Pos 2 =
Agility
DX7 (Gen 1) Acro
Gear = INH
Flap = GEAR
Trainer = Aux1
AUX1 = REV
All Others = NORM
Th rottle Travel =
100% Low,
100% Full
Gyro Switch Pos 0 =
Stability
Ail D/R
switch
100% 70%
Timer
Count Down
08:00 Tone
Start: Throttle Out
Pos: 25%
Gyro Switch Pos 1 =
Intermediate
Gyro Switch Pos 2 =
Agility
DX8 (Gen 1) Acro
Flap = INH
Trainer = AUX1
Gear = INH
F Mode = Gear
AUX1 = REV
All Others = NORM
Th rottle Travel =
100% Low,
100% Full
Switch B Pos 0 =
Stability
Ail D/R
switch
100% 70%
Timer
Count Down
08:00 Tone
Start: Throttle Out
Pos: 25%
Switch B Pos 1 =
Intermediate
Switch B Pos 2 =
Agility
DX6 (Gen 2),
DX7 (Gen 2),
DX8 (Gen 2),
DX9, DX18,
DX20
Acro
Channel Input
Con g
5 GEAR = B
6 AUX 1 = I
AUX1 = REV
All Others = NORM
Th rottle Travel =
100% Low,
100% Full
Switch B Pos 0 =
Stability
Ail D/R
switch
100% 70%
Timer
Count Down
08:00 Tone
Start: Throttle Out
Switch B Pos 1 =
Intermediate
Switch B Pos 2 =
Agility
Program your transmitter before attempting to bind or fl y
the helicopter. Transmitter programming values are shown
below for the Spektrum
™
DX6i, DX4e, DX5e, DX7 (Gen 1),
DX8 (Gen 1), DX6, DX7, DX8, DX9, DX18 and DX20.
The fi les for models using a DXe or Spektrum transmitters
with AirWare
™
software are also available for download
online at www.spektrumrc.com.
Transmitter
Model
Type Setup / Channel Assignments
Reversing
Setup Flight Modes Dual Rates
High
Rate
Low
Rate
Other
Settings
DX6i Acro
Travel Adj: GEAR POS (0) GEAR: ↑100%;
GEAR/F MODE POS (1) GEAR: ↓48%
FLAPS: Norm ←↑100; LAND ↓100
MIX 1: ACT; GEAR → GEAR ACT
RATE D 0%; U + 100%
SW MIX TRIM INH
THRO-N
ELEV-N
GEAR-R
AILE-N
RUDD-N
FLAP-N
GEAR 0; Mix 0 =
Stability
ELEV-AIL D/R 100% 70%
Timer
Down, 08:00
GEAR 1; Mix 0 =
Intermediate
GEAR 1; Mix 1 =
Agility
Panic Mode Operation
FLAP Switch
Pos 0 = Panic Mode Off
Pos 1 = Panic Mode On
If you get into distress while  ying in any mode, set the FLAP Switch to Position 1, set the throttle to
50% and move the control sticks to their neutral position. Panic Mode will return the aircraft to a stable
attitude, if the aircraft is at a suf cient height with no obstacles in its path. When the helicopter returns to
level  ight, set the FLAP Switch back to Position 0 to turn off Panic Recovery and return to the current
 ight mode.
If you get into distress while  ying in any mode, press the Bind Button, set the throttle to 50% and
move the control sticks to their neutral position. Panic Mode will return the aircraft to a stable attitude,
if the aircraft is at a suf cient height with no obstacles in its path. When the helicopter returns to level
 ight, release the Bind Button to turn off Panic Recovery and return to the current  ight mode.