User Manual

9
EN
Transmitter Model
Type
Reverse Setup
Mode Setup Switch Positions
Throttle Cut
Camera Operation Dual
Rate Switch
High Rate
Low Rate
DX7S Acro
AUX1 - R All Others - N
Switch Select: Trainer to Aux 1; F Mode to Gear Set All Others to Inh Throttle Cut: MIX 1 Mixing: MIX 1: GER > GER RATE: 0% -100% OFFSET: 0%; TRIM: Inh SW: Ele D/R
F MODE (0), ELEV D/R (1) = Stability Mode, Low Angle
Switch to Mix 1
Still Mode(Default) Press Trainer = Take Picture Video Mode Press Trainer = Start/Stop Recording Press & Hold Trainer for 4 Seconds = Change Modes
ELEV-AIL D/R
100% 70%
F MODE (1), ELEV D/R (1) = Stability Mode, High Angle F MODE (1), ELEV D/R (0) = Agility mode
DX8 Acro
AUX1 - R All Others - N
Switch Select: Trainer to Aux 1 F Mode to Gear All Others to Inh Throttle Cut: MIX 1
F MODE (0) = Stability Mode, Low Angle
Switch to Mix 1
Still Mode(Default) Press Trainer = Take Picture Video Mode Press Trainer = Start/Stop Recording Press & Hold Trainer for 4 Seconds = Change Modes
ELEV-AIL D/R
100% 70%
F MODE (1) = Stability Mode, High Angle F MODE (2) = Agility Mode
DX9/DX18 Acro
AUX1 - R All Others - N
Channel Assign: NEXT 1-4: N/A 5 Gear: B 6 AUX1: I 7-10: Inh Throttle Cut: Switch H
B (0) = Stability Mode, Low Angle
Switch H
Still Mode(Default) Press Trainer = Take Picture Video Mode Press Trainer = Start/Stop Recording Press & Hold Trainer for 4 Seconds = Change Modes
ELEV-AIL D/R
100% 70%B (1) = Stability Mode, High Angle
B (2) = Agility Mode