User Manual

16
EN
3
16
4
7
14
13
2
2
1
10
6
8
9
8
9
5
11
12
15
Exploded View
Parts Listings
Part # Description
1 BLH3506 Main Gear: BMSR/X, mCP X, mQX
2
BLH3515,
EFLH2215
Outer Shaft Bearing 3 x 6 x 2mm(2):
BMCX/2/MSR/X, FHX, MH-35, MCP
X, mQX
3 BLH7401A
5-in-1 Control Unit, RX/ESCs/Mixer/
Gyros/Camera Control: 180 QX HD
4 BLH7402 Canopy: 180 QX HD
5 BLH7403A 5-in-1 Mounting Frame: 180 QX HD
6 BLH7404 Landing Gear 180 QX HD
7 BLH7502 Thruster Boom with Wiring (2): mQX
8 BLH7503
Motor with Pinion, Clockwise Rotation:
mQX
9 BLH7504
Motor with Pinion, Counterclockwise
Rotation: mQX
10 BLH7513 Propeller Shaft, Carbon: mQX
Part # Description
11 BLH7405
Propellers, CW & CCW Rotation, Orange
(2): 180 QX HD, mQX, 1 Propeller,
Orange (CW), 1 Propeller,
Orange (CCW), 2 Screws
12 BLH7406
Propellers, CW & CCW Rotation, Black
(2): 180 QX HD, mQX, 1 Propeller,
Black (CW), 1 Propeller, Black (CCW),
2 Screws
13 BLH7561 Motor Mount with Landing Skid: mQX
14 BLH7562 Motor Mount Cover (2): mQX
15 EFLA801
Digital Video Camera With
Still Capability
16 EFLB5001S25 500mAh 1S 3.7V 25C LiPo Battery
EFLC1010 1S USB Li-Po Charger, 500mA JST
EFLH1063 MLP6DSM SAFE Transmitter
Problem Possible Cause Solution
LED on the receiver fl ashes rap-
idly and the quadcopter will not
respond to the transmitter (after
binding).
Less than a 5-second wait between fi rst
powering on the transmitter and connect-
ing the fl ight battery to the quadcopter.
Leave the transmitter powered on. Discon-
nect and reconnect the fl ight battery to the
quadcopter.
The quadcopter is bound to a different
model memory (ModelMatch™ transmit-
ters only).
Select the correct model memory on the
transmitter. Disconnect and reconnect the fl ight
battery to the quadcopter.
Flight battery or transmitter battery charge
is too low.
Replace or recharge batteries.
Aircraft or transmitter is too close to
large metal object, wireless source or
another transmitter.
Move aircraft and transmitter to another
location and attempt connecting again.
Crashes immediately upon lift-off
Propellers in wrong locations or
incorrect fl ight mode selected.
Ensure propeller direction and motor
direction are correct.