Instruction manual

5
EN
First Flight Preparation
• Removeandinspecttheboxcontents
• Chargetheightbattery
• Programyourcomputertransmitter
• Installthefullychargedightbatteryinthe
helicopter
• Bindyourtransmittertothehelicopter
• Familiarizeyourselfwiththeightcontrols
• Findanopenareaforying
Flying Checklist
❏ Always turn the transmitter on first
❏ Plugtheightbatteryintotheleadfromthe
ybarlessunit
❏ Allowtheybarlessunittoinitializeand
armproperly
❏ Flythemodel
❏ Landthemodel
❏ Unplugtheightbatteryfromtheybarlessunit
❏ Always turn the transmitter off last
Battery Charging
Celectra™ 2-Cell 7.4V DC Li-Po Charger (EFLUC1007)
2S 7.4 V 300mAh 35C Li-Po Battery Pack (E-flite EFLB3002S35)
TheBlade130X2SLi-PobatteryfeaturesanEFL2connec-
torthatallowsyoutosafelychargeyourbatterypackwhen
usedwiththeincludedLi-Pochargerandchargeadapter.The
includedightbatteryissafetochargeupto3C(0.9Amp).
UseonlyHorizonHobbyapprovedbatterypacksandchargers
compatiblewiththisproduct.
1.Connectthepowersupplytoanappropriatepowersource.
2.Connectthebatterychargertothepowersupply.
3.Alignthetabonboththebatteryandchargerconnectors.
Connectthebatterytothechargerlead.
4.PresstheStart/Stopbuttononthecharger.
5.BatterychargingiscompletewhenthechargerLEDissolidgreen.
AC Power Supply Precautions and Guidelines
NEVERattempttopowerthechargerfromanACoutletwithouttheuseofaproperACtoDCadapter/power
supply.
DONOTconnectchargedordischargedLi-Pobatteriesifthepowersupplyisconnectedtothechargerbutthe
powersupplyisnotconnectedtoapowersource.Doingsowilldischargeandpossiblydamagethebatteries.
ForACoperation,onlyuseanE-ite®12Vpowersupplywiththischarger.