User Manual

6
EN
Panic Mode Operation
ELEV D/R Switch
Sw Pos 0 = Panic Mode Off
Sw Pos 1 = Panic Mode On
Once the model has returned to level you must manually
return the Panic Mode Switch to the off position and move
the collective stick to 50%, otherwise the cyclic and tail rotor
controls will be reduced.
Program your transmitter before attempting to bind or fl y
the helicopter. Transmitter programming values are shown
below for the Spektrum DX6i, DX7s, DX6, DX7, DX8, DX9,
DX18 and DX20.
The fi les for models using Spektrum
™
transmitters with
AirWare
™
software are also available for download online
at www.spektrumrc.com.
To use the Spektrum
™
DXe transmitter, download the Blade
®
130 S DXe model setup available at www.spektrumrc.com
or use the appropriate programming cable and the PC or
mobile app to program the transmitter.
Transmitter Setup (BNF)
Flight Mode Operation
Gear/F Mode Sw: Pos 0 = Stability Mode
Gear/F Mode Sw: Pos 1 = Intermediate Mode
* If you would like to have Agility Mode available
instead of Intermediate Mode increase the Throttle
Curve "STUNT" value to 100 in all positions.
D/R & Expo
Chan Sw Pos D/R Expo
AILE
0 100 +25
1 75 +25
ELEV
0 100 +25
1 75 +25
RUDD
0 100 +25
1 75 +25
Mix 1
GYRO->GYRO ACT
Rate D+125% U+125%
SW ELE D/R TRIM – INH
Timer
Down Timer 4:00
Switch THR CUT
ADJUST LISTSETUP LIST
DX6i
DXe
Throttle Curve
Switch Pos
(F Mode)
Pos
1
Pos
2
Pos
3
Pos
4
Pos
5
NORM 0 48 66 75 80
STUNT* 80* 80* 80* 80* 80*
TRAVEL ADJ
Channel Travel
THRO 100/100
AILE 100/100
ELEV 100/100
RUDD 100/100
GYRO 100/100
PITC 100/100
REVERSE
Channel Direction
THRO N
AILE N
ELEV N
RUDD N
GYRO N
PITC R
GYRO
RATE SW-F.MODE
0 88% NORM 0
1 12% STUNT 1
Modulation Type
AUTO DSMX-ENABLE
D/R COMBI
D/R SW AILE
Model Type HELI
Swash Type
1 servo
Normal
Pitch Curve
Switch Pos
(F Mode)
Pos
1
Pos
2
Pos
3
Pos
4
Pos
5
NORM 40 45 50 75 100
STUNT 0 25 50 75 100
HOLD 40 45 50 75 100