User Manual

5
EN
Installing the Transmitter Batteries (RTF)
Transmitter Control (RTF)
The LED indicator fl ashes and the transmitter
beeps progressively faster as the battery voltage
drops.
Replace the transmitter batteries when the
transmitter begins to beep.
D
E
C
B
Flight mode switch
Adjusting Flight Trims
The transmitter beeps each time the trim buttons are
pressed. The middle or neutral trim position is heard as a
longer tone. The end of the trim range is indicated by no
tone when the trim button is pushed.
Dual Rate Selection
The control sensitivity can be changed by pressing and
releasing the right control stick. The LED on the transmitter
will show solid for high sensitivity (default) and fl ashing for
low sensitivity.
Bind/panic switch
Dual rate
switch
Throttle Hold
ABCDE F
Mode 1
Aileron (Left/Right)
Throttle/Collective
(Up/Down)
Throttle
Trim
Aileron
Trim
Rudder
Trim
Elevator
Trim
Rudder (Left/Right)
Elevator (Up/Down)
Mode 2
Aileron (Left/Right)
Elevator (Up/Down)
Elevator
Trim
Aileron
Trim
Rudder
Trim
Throttle
Trim
Rudder (Left/Right)
Throttle/Collective
(Up/Down)
ON/OFF
Switch
Power LED/
Rate Indicator
A
F