Technical data

RackSwitch G8124 Command Reference

 Chapter 3: Statistics Commands BMD00076, January 2009

Management Processor Statistics

The following table describes the commands used to display statistics about the switch’s man-

agement processor.

Packet Statistics

The following command displays packet statistics:

show mp packet

Command mode: All

Table 3-16 Management Processor Statistics commands

Command Syntax and Usage

show mp packet

Displays packet statistics, to check for leads and load.

Command mode: All

To view a sample output, see page 94.

show mp tcp-block

Displays all Transmission Control Protocol (TCP) control blocks (TCB) that are in use.

Command mode: All

To view a sample output, see page 95.

show mp udp-block

Displays all User Datagram Protocol (UDP) control blocks (UCB) that are in use.

Command mode: All

To view a sample output, see page 96.

show mp cpu

Displays CPU utilization for periods of up to 1, 5, and 15 minutes.

Command mode: All

To view a sample output, see page 97.

Packet counts:

allocs: 1233687 frees: 1233683

hi-watermark: 89 failures: 0