Technical data

RackSwitch G8124 Command Reference
64
 Chapter 2: Information Commands BMD00076, January 2009
Status Displays the status of the filter, as follows:
 Active: The filter is assigned to a port(s).
 Inactive: The filter is not assigned to a port(s).
MAC Access Lists
Protocol Type Displays the protocol number (or name) of the traffic to be filtered.
Vlan Id Displays the VLAN index (tag number) of the traffic to be filtered.
Destination MAC
Address
Displays the destination MAC address of the traffic to be filtered.
Source MAC
Address
Displays the source MAC address of the traffic to be filtered.
In Port List Displays the port(s) were the filter is applied.
Filter Action Displays the filter action (permit or deny).
User Priority Displays the value of user priority of the traffic to be filtered.
Statistics Displays the status of the filter statistic (enable or disable).
Status Displays the status of the filter, as follows:
 Active: The filter is assigned to a port(s).
 Inactive: The filter is not assigned to a port(s).
Table 2-24 ACL parameter descriptions (Continued)
Parameter Description