Technical data

RackSwitch G8124 Command Reference
Chapter 2: Information Commands
 63BMD00076, January 2009
Access Control List (ACL) information includes configuration settings for each ACL.
Table 2-24 ACL parameter descriptions
Parameter Description
IP Access Lists
Filter Protocol
Type
Displays the IP protocol number (or name) of the traffic to be filtered.
Filtering
FIN(SYN, ACK)
bit
Displays the TCP flag to be filtered.
Source IP
address
Displays the source IP address (host or network) of the traffic to be filtered.
Source IP
address mask
Displays the net mask address of the traffic to be filtered.
Destination IP
address
Displays the destination IP address (host or network) of the traffic
to be filtered.
Destination IP
address mask
Displays the net mask address of the traffic to be filtered.
In Port List Displays the port(s) were the filter is applied.
Filter TOS Displays the Type Of Service value to be filtered.
Filter DSCP Displays the DiffServ Code Point value to be filtered.
Filter Source
Ports From
Displays the starting port number for a source port range of the TCP/UDP
traffic to be filtered.
Filter Source
Ports Till
Displays the ending port number for a source port range of the TCP/UDP
traffic to be filtered.
Filter Destina-
tion Ports From
Displays the starting port number for a destination port range of the TCP/
UDP traffic to be filtered.
Filter Destina-
tion Ports Till
Displays the ending port number for a destination port range of the TCP/
UDP traffic to be filtered.
Filter Action Displays the filter action (permit or deny).
User Priority Displays the value of user priority of the traffic to be filtered.
Statistics Displays the status of the filter statistic (enable or disable).