Technical data

RackSwitch G8124 Command Reference
56
 Chapter 2: Information Commands BMD00076, January 2009
IGMP Multicast Group Information
Table 2-19 IGMP Multicast Group Information Commands
Command Syntax and Usage
show ip igmp groups address <IP address>
Displays IGMP multicast group information by the group’s IP address.
Command mode: All
show ip igmp groups interface <port alias or number>
Displays all IGMP multicast groups on a selected port.
Command mode: All
show ip igmp groups portchannel <trunk group number>
Displays all IGMP multicast groups on a selected trunk group.
Note that portchannel 1-12 indicates static trunks, and portchannel 13-36 indicate LACP trunks.
Command mode: All
show ip igmp groups vlan <1-4094>
Displays all IGMP multicast groups on a selected VLAN.
Command mode: All
show ip igmp groups detail <IP address>
Displays details about an IGMP multicast group, including source and timer information.
Command mode: All
show ip igmp groups
Displays information for all multicast groups. To view an example of the command output, see
page 57.
Command mode: All
show ip igmp mrouter information
Displays IGMP Multicast Router information.
Command mode: All
show ip igmp mrouter vlan <1-4094>
Displays IGMP multicast routers for the selected VLAN.
Command mode: All