Technical data

RackSwitch G8124 Command Reference
42
 Chapter 2: Information Commands BMD00076, January 2009
show spanning-tree mstp mrst
Shows current Multiple Spanning Tree settings.
Command mode: All
show portchannel information
When trunk groups are configured, you can view the state of each port in the various trunk groups.
To view an example of the command output, see page 53.
Command mode: All
show vlan <1-4094>
Displays VLAN configuration information for all configured VLANs, including:
 VLAN Number
 VLAN Name
 Status
 Jumbo Frame usage
 Port membership of the VLAN
Command mode: All
show private-vlan detail
Displays Private VLAN information.
Command mode: All
show ufd
Displays Uplink Failure Detection information.
Command mode: All
show layer2 information
Dumps all Layer 2 switch information available (10K or more, depending on your configuration).
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump commands.
Command mode: All
Table 2-13 Layer 2 General Information Commands
Command Syntax and Usage